Stratacote | Nanocote Sealant

STRATA NANO-COTE Sealer

Strata NANO-COTE is a solvent free, self-assembling micro emulsion. The small molecular chain is creating a capillary impregnation without filling the pores and capillary structure. The product is designed as a water-soluble impregnating agent for masonry, including highly alkaline cement based surfaces. It chemically bonds with concrete and masonry substrates and becomes invisible once dry. Its penetration and subsequent chemical reaction with the concrete allows it to provide long term protection for cement based substrates by significantly reducing the ingress of liquid water and any dissolved salts and contaminations that the water may carry.

STRATA NANO-COTE concentrate diluted can be used for the water repellent treatment on following substrates:

• Concrete
• Pavers
• Bricks
• Plaster , Render
• Fiber Cement products
• Roof tiles
• Porous natural stones

Other Nano-cote coating benefits

Water based
Environmentally friendly
Plant friendly
Does not damage glass
One litre product = 10 litre ready to use product
Recommended coverage is 200ml per square meter. ( 2 times spray wet on wet - 10 Litre of mixed product seals up to 30m2)
Can be diluted up to 100 parts of water for the use as concrete additive.
Can be diluted with ordinary tap water (no additional expense of distilled water)
VOC free
Stops efflorescence

NANO-COTE Sealer 1L

$195

What Do I need?

Compare Nanocote and Aquaseal.

Keen to learn about Aquaseal?

Aquaseal	Nanocote
Invisible once dry on stone and concrete. May leave a white salty film on red brick.	Invisible once dry.
Lasts approx. 3 years.	Lasts approx. 8 years.
Lower purchase price.	More cost effective in the long run as more durable.
Aquaseal is not harmful to plants – (we do advise covering delicate or important plants)	Nano is not harmful to plants – (we do advise covering delicate or important plants)
Nontoxic to people and pets, unlike many others on the market.	Nontoxic to people and pets, unlike many others on the market.
Aquaseal can be applied to damp surface.	Nano can only be applied to completely dry surface.
Aquaseal will etch glass and joinery – so covering prior to sealing is recommended.	Nano does not etch glass and joinery (it can leave a light residue, so is advised to cover windows prior to sealing)
Fume free and non-flammable.	Not corrosive, non-flammable and non-carcinogenic. Odour/fume free.
X	Penetrates deeper into the brick or stone than Aquaseal.
X	Does not rely on solvents and other hazardous materials for penetration
X	Meets modern environmental and other building standards and requirements

Download the Nanocote SDS and Data Sheet Here.

Have a Question?

Talk to us about your surface sealing project today and let us know your questions!

We can give you advice about your project and let you know any additional information you need.

We deliver New Zealand wide! from Stewart Island to Cape Reinga, from Haast to Chatham Islands, and everywhere in between!